01.

LIST OF PERMITTING/APPROVING DOCUMENTS

Environmental product declarations

Environmental Product Declaration (EPD) – reinforcing stabilized three- and seven-wire strands with and without dents with a nominal tensile strength of 1670÷1860 N/mm2 with a diameter of 6.5÷15.7 mm (PC-strand)

Issued by:

Date of issue:

Valid until:

ISO 9001:2015

Certificate of conformity of the quality management system with the requirements of ISO 9001:2015

Issued by:

Bureau Veritas Holding SAS

Date of issue:

21.10.2019

Valid until:

14.12.2025

CERTIFICATES AND CONFORMITY CERTIFICATES FOR STEEL WIRE

22.80001.180

Certificate of Approval for Welding Consumables (steel welding wire «GOST 2246-70 (Св-08Г2С)and TU U 25.9-26209430-006:2020 (Св-08Г2С and Св-08Г2С-О))

Issued by:

ЧАО «МОРСКОЙ РЕГИСТР СУДОХОДСТВА В УКРАИНЕ, г. Одесса

Date of issue:

03.01.2022

Valid until:

21.09.2026

1397-СPR-0723

Certsficate of Conformity of the Factory Production Control welding consumables. wire electrodes 3Si1 and 4Si1 according EN 14341-2020"

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

03.01.2022

Valid until:

« Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly.»

CERTIFICATES AND CONFORMITY CERTIFICATES FOR STEEL WIRE ROPES

CONFORMITY CERTIFICATES FOR STEEL FIBRE

1397-CPR-0746

EC - certificate of constancy of performance for hooked ends steel fibres: 60-0,9 mm with Tensile strength -2150 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

09.03.2023

Valid until:

BSI Certificate CPR 766627

Certificate of performance consistency of steel fiber with bent ends 50-1.0 mm and 60-1.0 mm with a temporary breaking strength of 1150 N/mm2 and 1550 N/mm2 for structural reinforcement of concrete and mortar, respectively EN 14889-1: 2006

Issued by:

Date of issue:

Valid until:

1397-CPR-0718

"EC - certificate of constancy of performance properties of steel fiber with bent ends 35-0.75 mm with a ultimate tensile strength of 1650 N / mm2 for structural reinforcement of concrete and mortar in accordance with EN 14889-1: 2006"

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

03.01.2022

Valid until:

Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly

1397-CPR-0717

"EC - certificate of constancy of performance properties of steel fiber with bent ends 35-0.75 mm with a ultimate tensile strength of 1250 N / mm2 for structural reinforcement of concrete and mortar in accordance with EN 14889-1: 2006

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

03.01.2022

Valid until:

Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly

1397-CPR-0710

EC - certificate of constancy of performance of steel fiber with flattened ends 50-1.0 mm with a ultimate tensile strength of 1150 N / mm2 for structural reinforcement of concrete and mortar in accordance with EN 14889-1: 2006

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

3.01.2022

Valid until:

Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly

1397-CPR-0768

EC - certificate of constancy of performance for hooked ends steel fibres: 50-0,75 mm with Tensile strength -1650 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

29.12.2023

Valid until:

Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly

1397-CPR-0769

EC - certificate of constancy of performance for hooked ends steel fibres: 50-0,75 mm with Tensile strength -1250 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

29.12.2023

Valid until:

Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly

1397-CPR-0347

EC - certificate of constancy of performance for hooked ends steel fibres: 50-1,0 mm with Tensile strength -1150 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

29.12.2023

Valid until:

Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly

1397-CPR-0459

EC - certificate of constancy of performance for hooked ends steel fibres: 50-1,0 mm with Tensile strength -1550 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

29.12.2023

Valid until:

Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly

1397-CPR-0412

EC - certificate of constancy of performance for hooked ends steel fibres: 60-1,0 mm with Tensile strength -1150 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

29.12.2023

Valid until:

Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly

1397-CPR-0460

EC - certificate of constancy of performance for hooked ends steel fibres: 60-1,0 mm with Tensile strength -1550 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

29.12.2023

Valid until:

Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly

1397-CPR-0676

EC - certificate of constancy of performance for hooked ends steel fibres: 60-0,9 mm with Tensile strength -1250 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

29.12.2023

Valid until:

Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly

1397-CPR-0770

EC - certificate of constancy of performance for hooked ends steel fibres: 60-0,9 mm with Tensile strength -1600 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

29.12.2023

Valid until:

Valid as long as a harmonized standard, factory production conditions or factory production control have not changed significantly

DECLARATIONS OF PERFORMANCE FOR MANUFACTURED TYPES OF CERTIFIED FIBRES ACCORDING TO EN 14889-1:2006

101

Declaration of performance No. 101 for hooked ends steel fibres: 60-0,90 mm with Tensile strength -2150 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

Date of issue:

Valid until:

107

Declaration of performance No. 107 for hooked ends steel fibres: 50-0,75 mm with Tensile strength -1150 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

Date of issue:

Valid until:

104

Declaration of performance No. 104 for hooked ends steel fibres: 50-0,75 mm with Tensile strength -1550 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

Date of issue:

Valid until:

105

Declaration of performance No. 105 for hooked ends steel fibres: 50-1,0 mm with Tensile strength -1150 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

Date of issue:

Valid until:

102

Declaration of performance No. 102 for hooked ends steel fibres: 50-1,0 mm with Tensile strength -1550 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

Date of issue:

Valid until:

106

Declaration of performance No. 106 for hooked ends steel fibres: 60-1,0 mm with Tensile strength -1150 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

Date of issue:

Valid until:

103

Declaration of performance No. 103 for hooked ends steel fibres: 60-1,0 mm with Tensile strength -1550 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

Date of issue:

Valid until:

108

Declaration of performance No. 108 for hooked ends steel fibres: 60-0,9 mm with Tensile strength -1250 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

Date of issue:

Valid until:

109

Declaration of performance No. 109 for hooked ends steel fibres: 60-0,9 mm with Tensile strength -1500 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

Date of issue:

Valid until:

110

Declaration of performance No. 110 for shape–deformed (with flattened ends) steel fibres: 50-1,0 mm with Tensile strength -1150 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

Date of issue:

Valid until:

111

Declaration of performance No. 111 for hooked ends steel fibres 35-0,75 mm with Tensile strength -1250 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

Date of issue:

Valid until:

112

Declaration of performance No. 112 for hooked ends steel fibres 35-0,75 mm with Tensile strength -1650 N/mm2, intended for structural reinforcement of concrete and mortar or grout in accordance with EN 14889-1:2006

Issued by:

Date of issue:

Valid until:

CERTIFICATES OF CONSTANCY OF PERFORMANCE FOR REINFORCEMENT PC STRANDS

Agrement Technic 021-01_006-2023 (AXA CERT)

The Technical approval АТ 021-01_006-2023 (AXA CERT) for the production of reinforcing strands with diameters of 6.9-15.7 mm for prestressed concrete

Issued by:

Date of issue:

Valid until:

KIWA Certificate No. 13985-01

Certificate of constancy of operational properties of strand SS 212551:2013, SS 212553:2013, prEN 10138-1:2006, prEN 10138-3:2006, FprEN 10138-1:2009, FprEN 10138-3:2009: Y1860 S7-9.30-15.20 (smooth strand)-R1-F1-С1 and Y1860 S7-9,3-12,9 (indented strand)-R1-F1-С1.

Issued by:

Date of issue:

Valid until:

License No. 111840 to mark a commodity with the Standards Mark

Certificate from the Standards Institute of Israel (SII). License No. 111840 to mark a commodity with the Standards Mark in conformity with the requirements of the Israel Standard No. 1735 Part 4 Edition November 2022. Strands with a diameter of 9.5, 12.7, 15.2, 15.7 mm.

Issued by:

Date of issue:

27.02.23

Valid until:

R-2.1.5-22-17818

Certificate of performance consistency for ÖNORM B 4758-Y 1770 S7-R1-F1-C1 and ÖNORM B 4758-Y 1860 S7-R1-F1-C1 reinforcing strands with diameters 9.3mm - 15.7mm

Issued by:

Date of issue:

21.10.22

Valid until:

KIWA-11196-03

Certificate of constancy of operational properties of strand SFS 1265-1:2014, SFS 1265-3:2014-Y1860 S7-9.30-15.20 (smooth and profiled)-R1-F1 and Y1860 S3-6.5 (profiled)-R1-F1

Issued by:

Date of issue:

Valid until:

SPSC-9512

Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S7-9,3-R1-F1-C1

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

03.01.2022

Valid until:

03.01.2025

SPSC-9513

Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S7-9,3-I-R1-F1-C1

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

03.01.2022

Valid until:

03.01.2025

SPSC-9517

Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S7-12,5-R1-F1-C1

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

03.01.2022

Valid until:

03.01.2025

SPSC-9518

Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S7-12,5-I-R1-F1-C1

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

03.01.2022

Valid until:

03.01.2025

№ 020-UWB-2725/W

National Certificate of constancy of performance for prestressing steel strands produced by PJSC «STALKANAT» made with smooth wires

Issued by:

ITB, Польша, г. Варшава

Date of issue:

10.06.2022

Valid until:

SPSC-9573

Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S7-12,5-I-R1-F2-C1

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

03.01.2022

Valid until:

03.01.2025

№ 20-CPR-322-(C-8-2018)

Certificate of constancy of performance for prestressing steel strand of 1860 MPа nominal tensile strength with diameter 9,3 mm, plain and indented surface

Issued by:

EMI, Венгрия

Date of issue:

27.06.2022

Valid until:

№ 20-CPR-328-(C-8-2018)

Certificate of constancy of performance for prestressing steel strand of 1860 MPа nominal tensile strength with diameter 12,5 mm, plain and indented surface

Issued by:

EMI, Венгрия

Date of issue:

27.06.2022

Valid until:

SPSC-9600

SPSC-9600 Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S7-12,50-R1-F2-C1

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

03.01.2022

Valid until:

03.01.2025

SPSC-9630

SPSC-9630 Certificate of constancy of performance for prestressing steel strand prEN 10138-3-Y1860S3-6,9-I-R1-F1-C1

Issued by:

SPSC, Vilnius, Lithuania

Date of issue:

03.01.2022

Valid until:

03.01.2025

DECLARATIONS OF PERFORMANCE FOR CERTIFIED TYPES OF PRESTRESSING STEEL STRANDS

1

Declaration of performance No. 1 for prestressing steel strand with diameter 9,3 mm (plain) (the Republic of Lithuania)

Issued by:

Date of issue:

Valid until:

2

Declaration of performance No. 2 for prestressing steel strand with diameter 9,3 mm (indented) (the Republic of Lithuania)

Issued by:

Date of issue:

Valid until:

3

Declaration of performance No. 3 for prestressing steel strand with diameter 12,5 mm (plain) (the Republic of Lithuania)

Issued by:

Date of issue:

Valid until:

4

Declaration of performance No. 4 for prestressing steel strand with diameter 12,5 mm (indented) (the Republic of Lithuania)

Issued by:

Date of issue:

Valid until:

5

Declaration of performance No. 5 for prestressing steel strand with diameter 12,5 mm (plain with fatigue class F2) (the Republic of Lithuania)

Issued by:

Date of issue:

Valid until:

6

Declaration of performance No. 6 for prestressing steel strand with diameter 12,5 mm (indented with fatigue class F2) (the Republic of Lithuania)

Issued by:

Date of issue:

Valid until:

7

Declaration of performance No. 7 for prestressing steel strand with diameter 12,5 mm (plain) (the Republic of Poland)

Issued by:

Date of issue:

Valid until:

8

Declaration of performance No. 8 for prestressing steel strand with diameter 15,2 mm (plain) (the Republic of Poland)

Issued by:

Date of issue:

Valid until:

9

Declaration of performance No. 9 for prestressing steel strand with diameter 9,3 mm (plain and indented) (Hungary)

Issued by:

Date of issue:

Valid until:

10

Declaration of performance No. 10 for prestressing steel strand with diameter 12,5 mm (plain and indented) (Hungary)

Issued by:

Date of issue:

Valid until:

11

Declaration of performance No. 10 for prestressing steel strand with diameters’ range: 6,9- 15,2 mm, the tensile strength ranges:1770 N/mm2, 1860 N/mm2 ( with plain and indented wires) (Romania)

Issued by:

Date of issue:

Valid until:

13

Declaration of performance No. 13 for prestressing steel strand with diameter 6,9 mm (indented) (the Republic of Lithuania)

Issued by:

Date of issue:

Valid until:

Certificate of CPL

№ К-6-23-ВЛ

Recognition Certificate of Competence of the Central Plant Laboratory

Issued by:

ДП «УкрНТЦ «ЕНЕРГОСТАЛЬ», г. Харьков

Date of issue:

21.12.2018

Valid until:

21.12.2021

DECLARATION OF PERFORMANCE For Welding wire

50

DECLARATION OF PERFORMANCE For Welding wire EN ISO 14341-A-G 3Si1

Issued by:

Date of issue:

Valid until:

51

DECLARATION OF PERFORMANCE For Welding wire EN ISO 14341-A-G 4Si1

Issued by:

Date of issue:

Valid until:

APPROVAL DOCUMENTS FOR WIRE, ROPES, STRAPS

№ 826-26/23

The certificate that the products such as: cold-drawn wire from non-alloy steel; - steel ropes; - rope slings are not subject to mandatory certification and conformity assessment with the Technical Regulations in Ukraine

Issued by:

ГП «Одессастандартметрология», г. Одесса

Date of issue:

10.08.22

Valid until:

10.02.23