| Print |

Mesh
line
Assortment


CORRUGATED MESH

Corrugated mesh is made according to GOST 3306-88 and TU U 28.7-00191046-018-2004 standards. The mesh has square form. The corrugated mesh is applied for bolts, for territory fencing, for protection from working machinery and so on. The mesh is produced from low carbon wire.
TYPE OF COATING:
- uncoated;
- galvanized.
TYPE OF MESH SIZE:
- partially corrugated mesh (PC);
- corrugated mesh (C);
- complicated corrugated mesh (CC).

MESH CHARACTERISTIC BY CELLS SIZE acc. to TU U 28.7-00191046-018-2004:
Mesh number Nominal size of cell one side, mm Tolerant deviation of cell one side, mm Diameter of wire, mm Type of mesh
2,6 2,6 ±0,3 1,20; 1,40 PC
3 3 ±0,3 1,35; 1,40; 1,60 С
3,5 3,5 ±0,30 1,60 C
4 4 ±0,3 1,60-2,00 C
5 5 ±0,3 1,80-2,20 C
6 6 ±0,3 2,20 C
8 8 ±0,3 3,00 C
10 10 ±0,4 1,80-4,00 C, CC
12 12 ±0,4 2,00-4,00 C, CC
13 13 ±0,4 3,00-4,00 C
16 16 ±0,5 3,00-5,00 C
20 20 ±0,6 2,00-6,00 C, CC
25 25 ±0,8 3,00-6,00 C, CC
30 30 ±1,50 3,00-5,00 CC
35 35 ±1,2 4,00; 6,00 CC
40 40 +1,30; -3,00 4,00 CC
40 40 ±1,3 св. 4,00-6,00 CC
45 45 +1,50 4,00-6,50 CC
50 50 ±1"5 4,00-6,50 CC
70 70 ±2 1 5,00-6,50 CC

Note 1. Acc. to the customer's request the production of steel mesh from wire of other diameters is allowed. Max deviation of wire has to correspond to max deviation of bigger wire diameter.
Note 2. Acc. to the customer's request the production of steel mesh from other nominal size of cell one side is allowed. Tolerant deviation in this case has to correspond to tolerant deviation of cell one side for bigger diameter.
Note 3. Acc. to agreement with customer the modification of tolerant deviation of cell one side is allowed.
Mesh is delivered in cards. The card size: width - max 2,0 m; length - min 5,0 m. On customer request the mesh can be delivered in cards with other length and width, divisible by 500 mm to specified limits. The cards are binding to the packages. The package weight had to be no more then 1500 kg.

<<Assortment